Programmable Digital Thermostat, Programmable Touchscreen Thermostat Smart Digital Home Floor Heating Controller, Fpga

Specification:
Item Type: Programmable Digital Thermostat
Material: ABS
Model: MH1822D
Temperature Sensor: NTC
Control Temperature Accuracy: ±1?
Power Consumption: Voltage: AC85 to 250V
Frequency: 60Hz
Load Current: 16A
Temperature Setting: 5 to 50 ?
Keys: Touch keys
Low Temperature Function:
In the shutdown state, the thermostat will self heat when the temperature is below 5? and stop heating when the temperature is 7?

How to Use:
Power key:
Touch the ON or OFF key to turn the system on or off
Press and hold for 10 seconds to the system to its factory settings
M mode key: Switch between automatic control mode or manual control mode
Up or Down Keys: Touch the up and down keys to set the temperature and adjust system parameters when turned on, and press and hold up and down simultaneously for 3 seconds when turned off. Switch between lock key function and unlock key function
Clock Key: You can manually adjust the current time and week by using this key in conjunction with the up or down button
Automatic Mode: Adjust to automatic mode, and the thermostat will operate in a weekly cycle

PackageList:
1 x Programmable Digital Thermostat
1 x Temperature Humidity Probe
2 x Screws
1 x English Manual

Package Dimensions ‏ : ‎ 4.06 x 3.98 x 2.17 inches; 9.52 ounces
Item model number ‏ : ‎ Fafeicyi42pu8rtw1
Date First Available ‏ : ‎ October 23, 2023
Manufacturer ‏ : ‎ Fafeicy
ASIN ‏ : ‎ B0CLM3L4W7
Country of Origin ‏ : ‎ China

High sensitivity: The smart thermostat is equipped with an external probe,the detection is more accurate, and the temperature measurement is accurate.
High Temperature : Smart thermostat has a control electric heating device, which can be applied to control floor heating devices. The built in sensor measures the indoor temperature, and the external sensor measures the floor temperature or the heating equipment temperature to control high temperature , preventing the heating device from burning due to high temperature.
Programming Mode: In the shutdown state, press and hold the mode key M and clock key for 5 seconds to enter programming mode. You can switch parameters through the mode key. After entering programming mode, press the mode key to adjust the hour, then press the mode key to adjust the minute, and press the mode key again to adjust the temperature.
Installation Position: The heating thermostat should be installed on the wall in a place where the surrounding air flows freely. Installation location should not be affected by other heat sources such as sunlight, air through and doors or exterior wall temperatures
Convenient Control: Floor heating controller has two control modes, manual mode and automatic mode. The automatic mode can control different temperature heating according to the user’s set time period. Manual mode does not need to be divided into time periods, and users can freely choose, which is convenient and saves time.